GTI L4-2.0L Turbo (BPY) (2007)
Discharge Air Temperature Sensor / Switch: Service and Repair
Left Footwell Vent Temperature Sensor G261, Removing and Installing
Left Footwell Vent Temperature Sensor G261, Removing And Installing
Removing:
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove instrument panel.
-
Remove bolts -1- and -3- (9 ±1.3 Nm).
-
Remove bracket -2-.
-
Disconnect electrical connection at sensor -1-.
-
Rotate Left Footwell Vent Temperature Sensor G261 -1- 90 degrees and remove from housing.
Installing:
Install in reverse order of removal.