GTI L4-2.0L Turbo (BPY) (2007)
Tire Pressure Sensor: Procedures
Tire Pressure Sensor, Assembly Overview
Tire pressure sensor, assembly overview
1 -
Tire pressure sensor
^
Supplied complete as a service part
^
Service life of battery in sensor approx. 7 to 10 years
^
When battery is empty, then the complete tire pressure sensor must be replaced
^
After using a wheel repair kit, the bore for the valve and opening of the pressure sensor must be wiped clean.
2 -
Valve core
^
Replace for each changing of tire
Note: Use only original manufacturers valve insert, it has a special coating!
3 -
Sealing washer
4 -
Sealing ring
5 -
Disc wheel
6 -
Union nut
^
8 Nm
7 -
Valve cap
^
Do not use comfort valve caps and metal caps
Change Intervals For Tire Pressure Sensor
Change intervals for tire pressure sensor
Note:
^
Tire pressure sensor and individual parts must be replaced in specific intervals.
^
Intervals in the table below apply only to the tire that has been removed from the rim and which must be replaced by a different tire.
^
An important requirement is that the tire has been removed properly from the rim, and tire pressure sensor was not damaged while doing so.