GTI L4-2.0L Turbo (BPY) (2007)
NOTE:
-
"Turn signal switch" consists of the components Turn Signal switch E2, Headlamp Dimmer/Flasher Switch E4 and depending on equipment (CCS)
Cruise Control Switch E45.
-
For reasons of clarity, steering column switches with Cruise Control Switch E45 are depicted as removed in the illustration.
Removing:
-
Release retaining clips -arrows- using a 1.0 mm feeler gauge -1- and remove "turn signal switch" toward rear.
Installing:
Install in reverse order of removal, noting the following:
NOTE: "Turn signal switch" must engage audibly.
Windshield Wiper Switch E, removing and installing
Removing:
NOTE: For reasons of clarity, steering column switches are depicted as removed in the illustration.
-
Release retaining clips -arrows- using a 1.0 mm feeler gauge -1- and remove Windshield Wiper Switch E toward rear.
Installing:
Install in reverse order of removal, noting the following:
NOTE: Windshield Wiper Switch E must engage audibly.
Base carrier for steering column switches, removing and installing