GTI L4-2.0L Turbo (BPY) (2007)
Wheel Bearing: Procedures
Wheel bearing, assembly overview
1 -
Suspension strut
2 -
Tie rod end
3 -
Socket head bolt
^
Tapered end of bolt must point in direction of travel
4 -
Socket head bolt
^
8 Nm
5 -
Left Front ABS Wheel Speed Sensor G47 / Right Front ABS Wheel Speed Sensor G45
^
Can be checked in Guided Fault Finding using
^
Before inserting speed sensor, clean inner surface of bore hole and coat with securing grease G 000 650
6 -
Cover plate
7 -
Nut
^
M12 x 1.5
^
20 Nm plus an additional 90° turn
^
Self-locking
^
Always replace after removal
8 -
Bolt
^
10 Nm
9 -
Vented brake disc
10 -
Bolt
^
M16 x 1.5 x 80
^
Hex head bolt = 200 Nm plus an additional 180° turn
^
12-point bolt = 70 mm plus an additional 90° turn
^
Always replace after removal
^
Vehicle must not stand on wheels when loosening and tightening
11 -
Bolt
12 -
Wheel hub with wheel bearing
^
Sensor ring for ABS is installed in wheel hub
^
Various versions
13 -
Wheel bearing housing