GTI L4-2.0L Turbo (BPY) (2007)
Leak Detection Pump: Service and Repair
Leak Detection Pump (LDP) V144, Rabbit/GTI With Engine Code BPY, Removing And Installing
Removing:
-
Remove right rear wheel housing liner.
-
Disconnect vacuum line -1-.
-
Disconnect electrical connector -2-.
-
Disconnect vent line -3- by pressing release button.
-
Remove nuts -arrows-.
-
Disengage diagnostic pump with bracket.
Installing:
Installation is in reverse order of removal, note the following:
-
Vent line -3- must engage audibly.
-
Install right rear wheel housing liner.