GTI L4-2.0L Turbo (BPY) (2007)
/Page-95003.png)
-
Comfort system
-
Functions - central control module for comfort system
-
Coding Comfort System Central Control Module -J393-
Comfort System Central Control Module J393, adapting
The following functions can be adapted:
-
Activating and deactivating "single door opening".*
-
Activating or deactivating "automatic locking of all doors and rear lid at >15 km/h"*
-
Activating and deactivating "automatic unlocking when removing ignition key" *
-
"Unlock return message via access/start authorization"
-
"Unlock return message via radio remote control"
-
"Unlock return message via key switch"
-
"Return message lock via access/start authorization"
-
"Return message for locking via radio remote control"
-
"Return message for locking via key switch"
-
"Return message for ATWS activated"
-
"Country selection for the intelligent alarm horn"
-
"Sensitivity of inclination sensor"
-
"Sensitivity of interior monitoring"
-
Activating and deactivating "battery monitoring (sounder)"
-
Activating and deactivating "comfort operation via radio-frequency remote control"
-
Activating and deactivating "anti-theft warning system - alarm delay when opening driver door"
-
Activating and deactivating "automatic rear lid locking at >7 Km/h"
*On vehicles with "Highline" equipment, the function cannot be adapted using a vehicle diagnosis, testing and information system, rather only directly
via steering column switch in instrument cluster via the "Basic setting, main menu, settings and comfort" functions.
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051A.
-
In Vehicle Diagnostic, Testing and Information System VAS 5051A, select operating mode "Guided Fault Finding".
-
Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
-
Body
-
Body repair procedures
-
01 - On Board Diagnostic (OBD) capable systems
-
Comfort system
-
Functions - central control module for comfort system
-
Adapting Comfort System Central Control Module -J393-
Comfort System Central Control Module J393, checking alarm sources of anti-theft warning system
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051A.
-
In Vehicle Diagnostic, Testing and Information System VAS 5051A, select operating mode "Guided Fault Finding".
-
Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
-
Body
-
Body repair procedures
-
01 - On Board Diagnostic (OBD) capable systems
-
Comfort system
-
Functions - central control module for comfort system
-
Comfort System Central Control Module -J393-, checking alarm sources of anti-theft alarm system
