GTI L4-2.0L Turbo (BPY) (2007)
-
Remove bolts - A - and remove transmission oil cooler - B -.
CAUTION! Coolant must not drip into transmission!
Oil cooler, installing
-
Replace O-rings - C - of oil cooler - B -.
-
Install oil cooler - B -, pay attention to O-rings - C - when doing this.
-
Install new bolts - A - and tighten to 20 Nm plus an additional 90° (1/4 turn).
-
Install coolant hoses on oil cooler and remove Hose Clamps Up to 25 mm dia. 3094.