GTI L4-2.0L Turbo (BPY) (2007)
-
Remove retaining disc - 3 - from shift cable and retaining disc - 4 - from selector cable.
-
Pull off shift cable and selector cable from pin - arrows -.
-
Spread a small quantity of grease G 000 450 02 on pin - arrows - of transmission shift lever - 1 and of actuator lever - 2 -.
-
Replace lock washers - 3 - and - 4 - after each disassembly.
-
Secure shift cable with retaining disc - 3 - and selector cable with retaining disc - 4 -.