GTI L4-2.0L Turbo (BPY) (2007)
Headlamp Washer Pump: Service and Repair
Headlamp Washer Pump V11, Removing and Installing
Headlamp Washer Pump V11, Removing And Installing
Headlamp Washer Pump V11 is installed at tank for windshield washing system and headlamp cleaning system in right wheel housing.
Removing:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Remove front bumper cover.
-
Remove Headlamp Washer Pump V11 -9- upward out of tank.
-
Disconnect electrical connection -10-.
-
To disassemble connecting tube -8-, pull securing clip at connection and pull connecting tube -8- from Headlamp Washer Pump V11.
Installing:
Install in reverse order of removal, noting the following:
-
Tighten all fasteners according to value in table.
-
Bleed headlamp washer system after completing assembly work.