GTI L4-2.0L Turbo (CBFA) (2008)
Brake Booster Vacuum Sensor: Service and Repair
Brake Booster Vacuum Sensor
Brake Booster Vacuum Sensor
Removing
-
Remove battery.
-
Remove the battery carrier.
-
Disconnect harness connector - 1 - from brake booster vacuum sensor G483 - 2 -.
-
Insert a screwdriver between stop and one end of securing ring into groove of sealing ring.
-
Now press securing ring - 1 - as far out of groove until brake booster vacuum sensor G483 - 2 - can be pulled out of brake booster.
Installing
-
Installation is performed in the reverse order of removal.