GTI L4-2.0L Turbo (CBFA) (2008)
-
Lay aside coolant hose - 2 - and electrical wiring harness - 1 -.
-
Remove bolt - arrow - and remove bracket.
-
Remove bolt - 2 - on the after-run coolant pump bracket.
Note:
^
The after-run coolant pump stays in the installation position.
-
Remove coolant hoses - 1 and 2 - and lay them aside.
-
Loosen nut - 2 -, remove bolt - 1 - and move support for the intake manifold to the right.
-
Remove oil separator.