GTI L4-2.0L Turbo (CBFA) (2008)
Intake Manifold: Service and Repair
Intake Manifold Assembly Overview
Intake Manifold Assembly Overview
1
-
Intake Air Temperature Sensor Bolt
-
5 Nm
2
-
Intake Air Temperature Sensor
3
-
EVAP Canister Purge Regulator Valve
4
-
Intake Manifold
5
-
Channel Separating Plate Vacuum Diaphragm
6
-
High Pressure Pump Bolts
-
Replace
-
10 Nm
7
-
Fuel Line From Fuel Tank Connection
8
-
Fuel Pressure Regulator Valve
9
-
High Pressure Pump
-
With fuel pressure regulator valve
-
Make sure dirt does not enter the fuel system when installing the high pressure pump.
-
The fuel system must be pressureless to install the high-pressure pump, releasing fuel pressure.
-
Install fuel line to the fuel rail free from tension
10
-
Roller Tappet
-
Remains inserted in cylinder head after removing high-pressure pump, removable
11
-
High Pressure Fuel Line Connection
-
Replace
-
22 Nm
12
-
Fuel Line to Fuel Rail
-
Do not install fuel line with tension
-
18 Nm
13
-
Intake Manifold Runner Control Valve
14
-
Fuel Injector
-
Replace O-rings
-
Note correct installation position