GTI L4-2.0L Turbo (CBFA) (2008)
-
Coat O-rings - 4 - with coolant.
-
Make sure both centering pins are installed in the cylinder block.
-
Install connection piece - 2 - into the oil cooler - 1 -.
-
Push coolant pump - 3 - onto the connection piece and onto the centering pins in the cylinder block.
-
Tighten bolts - 1 to 5 - in sequence.
Note:
^
If a new coolant pump was installed, the protective cap - arrow - must be removed.
The rest of installation follows reverse order of the removal procedures.