GTI L4-2.0L Turbo (CBFA) (2008)
License Plate Lamp: Service and Repair
License Plate Lamp
Bulb, removing and installing:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Remove bolts - arrows - for the license plate lamp.
-
Remove diffusion lens with bulb from license plate lamp housing.
-
Press contact plate in direction of arrow and remove bulb.
Installation is the reverse of removal, noting the following:
NOTE: On the lens of the license plate lamp a small silver-colored glare-blocking strip - arrow - is applied. When installing the lens, this must always
face toward the bumper.
License plate lamp, removing:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.