GTI L4-2.0L Turbo (CBFA) (2008)
Fuse Block: Service and Repair
Left Instrument Panel Fuse Holder
Left Instrument Panel Fuse Holder
Special tools, testers and auxiliary items required
-
Trim removal wedge VAS 3409
NOTE: When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (trim
removal wedge VAS 3409, screwdriver) will be positioned, using commercially available adhesive tape.
CAUTION: When disconnecting and connecting battery, the procedure must be followed as described in the Repair Information.
Removing
-
Disconnect battery
-
Remove storage compartment on driver side
-
Remove side cover - 1 - of instrument panel, do this by inserting trim removal wedge VAS 3409 or a screwdriver into recess - 2 - and pry off cover
- 1 - in - direction of arrow -.
-
Remove fuse assignment card - 1 - from fuse holder - 2 -.
-
Remove mounting bolts - arrows - and guide out fuse holder - 1 - toward inside as far as cable lengths permit.
Installing
Install in reverse order of removal.