GTI L4-2.0L Turbo (CBFA) (2008)
/Page-387001.png)
Tire Pressure Sensor: Procedures
Tire Pressure Sensor Assembly Overview
1 - Tire Pressure Sensor
^
Supplied complete as replacement part
^
When battery is discharge, the entire tire pressure sensor must be replaced
^
After using a wheel repair kit, the bore for the valve and opening of the pressure sensor must be wiped clean.
2 - Valve core
^
Replace at every tire change
Note: Use only original manufacturers valve insert, it has a special coating!
3 - Sealing washer
4 - Seal
5 - Disc wheel
6 - Union nut
^
8 Nm
7 - Valve cap
^
Use only original valve caps from the repair kit
^
Do not use Comfort valve caps and metal caps
