GTI L4-2.0L Turbo (CBFA) (2008)
-
Disengage harness connector - 1 - by pulling locking button - 2 - in direction of arrow.
-
Remove connector - 1 - and remove Battery Interrupt Igniter N253 - 3 - from vehicle.
CAUTION: While doing this, observe safety precautions when working on pyrotechnic battery isolation system.
Installing:
Install in reverse order of removal, noting the following:
NOTE: When installing connector to Battery Interrupt Igniter N253, ensure connector engages audibly.
-
Tighten all threaded connections to specified torque.
-
Connect battery venting hose.
-
Reconnect battery.
CAUTION: Central battery venting hose must not be kinked, closed and/or damaged. Battery acids pose health risks and are explosive.
Carefully route the hose and ensure the battery can vent freely and not into inside of vehicle.