GTI L4-2.0L Turbo (CBFA) (2008)
/Page-1240002.png)
-
Insert the adapter in the wiring eyelet and sand off the corrosion and contamination with circular motions.
-
Check the wiring eyelet and resand it if necessary.
-
If necessary, remove the burr on the wiring eyelet with the deburrer.
-
Reinstall the wiring eyelet with the specified torque.
NOTE: Optimal contact is ensured if the bolted components are tightened to the specified torque after cleaning.
-
Protect the connection with the corresponding protection material.
-
Reconnect the battery.
-
Reprogram the window regulators, enter the radio code, set the clock and, if necessary, recode control modules that have error messages.
Threaded Connections, Repairing
Threaded Connections, Repairing
CAUTION: Risk of injury. Observe warning notes and safety precautions.
Special tools, testers and auxiliary items required
-
VAG 1331
NOTE:
-
Do not use rust remover, contact spray or grease because the lack of friction will cause the torque to be exceeded when installing and this will
lead to the threaded connection breaking.
-
The gray sanding pads are for slight contamination and suitable for "soft surfaces". The red sanding pads are for heavy contamination and
suitable for "hard surfaces".
-
Disconnect battery.
