GTI L4-2.0L Turbo (CBFA) (2008)
-
Remove bolt - 2 - (20 Nm).
NOTE:
-
The screw is micro-encapsulated and must be replaced every time it is loosened.
-
Before new bolts are installed, the thread of the corresponding nut must be cleaned.
-
Turn belt latch 90 degrees clockwise - arrow A -.
-
Swivel belt latch toward outside - arrow B -.
-
Remove belt latch from mount in seat rail - arrow C -.
Installing
-
Installation is performed in the reverse order of removal.