GTI L4-2.0L Turbo (CBFA) (2008)
/Page-1311006.png)
Illustration shows steering gear (Generation I).
Continue on steering gear (Generation I).
Continue on steering gear (Generation II).
Steering Gear, Converting From Generation I to Generation II
Steering Gear, Converting from Generation I to Generation II (Rabbit)
Note:
^
There are no longer any Generation I steering gears available as replacement parts.
^
For this reason, Generation II steering gear must be installed for it.
^
On some vehicles, a few other parts may need to be replaced in addition to the steering gear. The following information explains the vehicles
that require this and the procedures.
The following parts listed must be replaced when replacing Generation I steering gear:
^
The wiring harness must generally be replaced.
^
The subframe from replacement part number 1K0.199.369 through 1K0.199.369.E. must be replaced. From replacement part number
1K0.199.369.F, the subframe no longer needs to be replaced.
^
On left-hand drive vehicles, the right from replacement part number 1K0.199.296 through 1K0.199.296.C. must be replaced. From replacement
part number 1K0.199.296.D, the no longer needs to be replaced.
