GTI L4-2.0L Turbo (CBFA) (2008)
Rear Knuckle: Service and Repair
Wheel Bearing Housing Bonded Rubber Bushing
Wheel Bearing Housing Bonded Rubber Bushing (Rabbit)
Special tools, testers and auxiliary items required
^
Installing tool 30 - 506 B
^
Impact sleeve 41-501
^
Sleeve 3160
^
Assembly tool 3301
^
Assembly tool 3346
^
Assembly tool 3350
^
Torque Wrench V.A.G 1332
Removing
-
Remove wheel.
-
Remove coil spring.
-
Remove wheel bearing/wheel hub unit.
-
Remove cover plate.
-
Remove bolt -arrow- for lower transverse link -1-.
Pressing out bonded rubber bushing
-
Attach tools as depicted in illustration.
1. Nut 3346/3
2. Press piece 3301
3. Tube 3301/3
4. Impact sleeve 41 - 501
5. Press piece 3350/1
6. Spindle 3346/2
-
Remove bonded rubber bushing by turning spindle.
Pull in bonded rubber bushing