GTI L4-2.0L Turbo (CBFA) (2008)
Rear Knuckle: Service and Repair
Wheel Bearing Housing
Wheel Bearing Housing (Rabbit)
Special tools, testers and auxiliary items required
^
Torque Wrench V.A.G 1332
Removing
-
Remove wheel.
-
Remove coil spring.
-
Remove wheel bearing/wheel hub unit.
-
Remove cover plate.
-
Remove ABS wheel speed sensor from wheel bearing housing.
-
Remove bolt -arrow-.
-
Remove bolt for tie rod -1-, upper transverse link -2- and lower transverse link -3- from wheel bearing housing -4-.
-
Remove coupling rod -arrow- from wheel bearing housing.
-
Hold wheel bearing housing firmly and remove bolts -arrows-.
-
Pull coupling rod -1- out of longitudinal control arm.
Installing