GTI L4-2.0L Turbo (CBFA) (2008)
13 - Bolt
^
M16 x 1.5 x 80
^
Hex head bolt = 200 Nm plus an additional 180° turn
^
Twelve point bolt = 70 Nm plus an additional 90° turn
^
Always replace after removal
Vehicle must not stand on wheels when loosening and tightening
14 - Bolt
15 - Wheel hub with wheel bearing (4-point mount)
^
Sensor ring for ABS is installed in wheel hub
^
Various versions
16 - Wheel bearing housing (4-point mount) - FN3 brake
^
With integrated brake carrier
^
If wheel bearing housing is replaced, vehicle alignment must be performed afterwards.
17 - Socket head bolt
^
M12 x 1.5 x 45
^
70 Nm plus an additional 90° turn
^
Always replace after removal
18 - Drive Shaft
19 - Nut
^
M12 x 1.5
^
70 Nm plus an additional 90° turn
^
Self-locking
^
Always replace after removal
Rear Suspension (FWD)
Wheel Bearing Housing and Trailing Arm Assembly Overview, FWD (Rabbit)
1 - Bolt
^
50 Nm plus an additional 45° turn
^
Always replace after removal
2 - Mounting bracket