GTI L4-2.0L Turbo (CBFA) (2008)
Seals and Gaskets: Removal and Replacement
Selector Shaft Lever Seal
Selector Shaft lever Seal - 02E, 6 Speed DSG A/T FWD
Special tools, testers and auxiliary items required
^
Tube VW 423
^
Pulling hook T20143
^
Torque wrench V.A.G 1331
Removing
-
Remove selector lever cable from transmission.
-
Remove selector shaft nut -arrow-.
-
Carefully pry lever -A- from selector shaft.
-
Pry out sealing ring.
Installing
-
Lightly oil new seal on outer circumference.
-
Fill area between sealing lip and dust lip halfway with sealing grease G 052 128.
-
Drive new seal in as far as the stop; be sure not to distort seal.
-
Install lever and tighten nut to 20 Nm.