GTI L4-2.0L Turbo (CBFA) (2008)
-
Insert over-center spring -2- from above into mounting bracket and hold spring end in installation position using release tool T10178.
-
Insert bearing pin of clutch pedal -1- into bearing pan of over-center spring.
-
Press on clutch pedal slightly, push bolt through and tighten self-locking nut.
Some vehicles have a damper -arrow- on the mounting bracket/clutch pedal.
-
Bring damper back into the installation position.
There are different ways of securing the impact bolster -1- in front of the clutch pedal -2-.
Securing with two bolts
-
Install impact bolster -1- and tighten the two bolts to the tightening specification.