GTI L4-2.0L Turbo (CBFA) (2008)
Fluid - M/T: Service and Repair
Transmission Oil, Checking - 02Q, 6 Speed M/T FWD
Special tools, testers and auxiliary items required
^
Torque Wrench V.A.G 1331
^
Triple square socket driver 3357
Transmission oil.
-
Remove noise insulation.
-
Remove sealing plug for gear oil inspection -arrow-.
The oil level is correct when the transmission is filled up to the lower edge of the filler hole.
-
Screw in bolt -arrow- with new seal.
-
Tighten bolt -arrow- to torque specification.
When filling again, note the following:
-
Remove bolt -arrow-.
-
Top off oil to lower edge of filler hole.
-
Screw in bolt -arrow- with new seal.
-
Tighten bolt -arrow- to torque specification.
-
Install noise insulation.
Different versions of oil filler and oil drain plugs
I - Oil filler or drain plug with multi-point socket head, 45 Nm
II - Oil filler or drain plug with hex socket head, 30 Nm