GTI L4-2.0L Turbo (CBFA) (2008)
Headlamp Washer Spray Nozzle: Service and Repair
Headlamp Spray Nozzle Lift Cylinder
Headlamp Spray Nozzle Lift Cylinder
Removing
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Remove spray nozzles with cover cap - 1 - up to stop out of bumper cover.
-
Unclip cover cap - 1 - from bearings - arrows - on spray nozzle holder.
-
Remove front bumper cover
-
Pull off securing clip - 4 - from hose connection.
-
Disconnect hose connection from lift cylinder - 2 -.
-
Remove screw - 1 -.
-
Unclip lift cylinder - 2 - from bracket - 3 -.
Installing
Install in reverse order of removal, noting the following:
-
The hose to lift cylinder must be clipped into hose bracket.
-
Tighten all threaded connections to specified torques
-
Bleed headlamp washer system after completing assembly work