GTI L4-2.0L Turbo (CCTA) (2009)
/Page-0005.png)
^
Read the Warning displayed on screen, and go forward to next screen, the software programming process will begin, as shown.
If a pop-up appears on VAS tester stating that Diagnostic link is faulty, ensure ignition is switched ON and select repeat.
^
Cycle the key as directed by the VAS tester.
^ SW 240 will now be shown for the software level.
Once programming is complete the following screen will be shown.
^ To retain DTC's select back button.
To erase ALL DTC's select continue button.
