GTI V6-2.8L (BDF) (2002)
-
Install ABS unit to bracket.
Note: Hand-tighten bolts at first to make attaching the individual brake lines easier.
-
After tightening brake lines, tighten hydraulic unit.
-
Continue installation in reverse order of removal.
-
Bleed brake system
-
Enter radio code.
-
Code control module.
Tightening Torques:
Control module to hydraulic unit max. ................................................................................................................................................ 4 Nm (35 inch lbs,)
Hydraulic unit to bracket ..................................................................................................................................................................... 8 Nm (70 inch lbs.)
Nut for brake master cylinder to brake booster ..................................................................................................................................... 20 Nm (15 ft. lbs.)
Brake lines at ABS unit:
Thread M10 x 1 .................................................................................................................................................................................... 14 Nm (10 ft. lbs.)
Thread M12 x 1 .................................................................................................................................................................................... 14 Nm (10 ft. lbs.)
Nut to body ........................................................................................................................................................................................... 20 Nm (15 ft. lbs.)
Cap nut to body .................................................................................................................................................................................... 20 Nm (15 ft. lbs.)