GTI V6-2.8L (BDF) (2002)
-
Disconnect 4-pin connector -arrow-from Engine Coolant Temperature (ECT) sensor -G62- with Engine Coolant Temperature sensor -G2-.
-
Drain coolant.
-
Remove coolant thermostat housing, Refer to Thermostat Housing, Engine Cooling, Service and Repair Parts of cooling system, engine side.
-
Turn crankshaft on vibration damper securing bolt in engine direction of rotation to TDC cyl. 1 -arrow-.
-
Remove cylinder head cover, Refer to Timing Cover, Service and Repair
-
Remove camshaft roller chain tensioner -arrow-.
-
Disconnect connections from following components on cover:
^
Camshaft Position (CMP) sensor -G40--1-,
^
Camshaft Position (CMP) sensor 2 -G163- -2-,
^
Valve 1 for camshaft adjustment -N205- -3-,
^
Camshaft adjustment valve 1 (exhaust) -N318- -4-.