GTI V6-2792cc 2.8L DOHC (AAA) (1996)
Rear brake caliper piston, removing & installing
Removing
Rear Caliper Piston Removal
- Turn knurled wheel of tool anti-clockwise to remove piston.
NOTE:
If piston is difficult to turn use open-end 13 mm wrench on flats provided (arrow -A-).
CAUTION! The collar of the tool (arrow) must be next to the caliper piston
Rear Caliper Seal Removal
- Carefully remove seal using modified wedge VAG 1474/5.
Modifying Wedge Tool VAG 1474/5
- Reshape wedge point size in area -a-.
- Width -b- = 6 mm (1/4 inch)
- Reshape wedge point to length -c-.
- Length -c- = 10 mm (3/8 inch)
- Remove burrs from point of modified wedge.
Installing