GTI V6-2792cc 2.8L DOHC (AAA) (1996)
Brake Master Cylinder: Service and Repair
Without ABS
Exploded View Of Master Cylinder/Booster Less ABS/EDL
Component Notes And Information
NOTE:
^
During removal and installation procedures, refer to the component location illustration above and component notes below.
^
Brake master cylinders and vacuum brake boosters from different suppliers are installed in production. If replacement is necessary, parts from
different suppliers are interchangeable.
1. Cap
2. Seal
3. Brake fluid reservoir
4. Plug
-
Moisten with brake fluid and press into reservoir
5. Not for USA/Canada models
6. Master cylinder
-
Cannot be repaired, replace complete if necessary
7. Nut
-
Tighten to: 20 Nm (15 ft lb)
8. Washer
-
Always replace
9. Not for USA/Canada models
10. Seal
-
Always replace
11. Vacuum brake booster
-
Cannot be repaired, replace complete if necessary
12. Nut
-
Tighten to: 20 Nm (15 ft lb)