GTI V6-2792cc 2.8L DOHC (AAA) (1996)
Throttle Cable/Linkage: Adjustments
Accelerator Pedal Cable:
Adjusting:
-
Remove Spark Plug connectors and cables.
-
Remove cable guides -1- and -2-.
-
Remove cover above upper intake manifold -3-.
Vehicles with manual transmission:
-
Adjust Accelerator Pedal cable by moving retainer clip -arrow- at the support bracket, until throttle valve is fully open (Wide Open Throttle
position).
Vehicles with automatic transmission:
-
Place spacer -1- between Accelerator Pedal -2- and stop -3-, and hold Accelerator Pedal in this position.
-
Dimension -a- = 15 mm (0.59 in.).
-
Fully open throttle valve (Wide Open Throttle) by pulling on outer cable. Fasten in this position with retainer clip -arrow-.