GTI V6-2792cc 2.8L DOHC (AAA) (1996)
/Page-65001.png)
Air Bag Control Module: Technical Service Bulletins
Airbag Control Module - Removing and Installing
Group: 69
Number: 97-04
Date: July 21, 1997
File this Technical Bulletin in Repair Manual No: W42 011 294 114A
Subject:
Airbag Control Module, Removing and Installing
Model(s):
Golf/GTI/Jetta/Cabrio
1993 -->
If a Siemens airbag control module is installed in a vehicle that was equipped originally with a Temic airbag control module, the wiring harness will
NOT have to be replaced.
The CAUTION! note on pages 69-58 and 69-60 of the Repair Manual is revised to include this change. The revised note appears on the following page
and will be integrated at the next Repair Manual update.
CAUTION!
^
From 11.94, the control module wiring harness (Part No. 1HO 971 581 B) has been changed to eliminate the brown ground wire -> item -2-, page
69-61.
^
The Temic control module needs the ground wire- the Siemens control module does not.
^
Only the Siemens control module and the wiring harness without the ground wire will be supplied as replacement parts. Both wiring harnesses, with
and without the ground wire, carry the same part number.
^
If a Siemens control module is installed in a vehicle that was equipped originally with a Temic control module, the wiring harness will NOT have to
be replaced.
^
Part numbers are listed for reference only. Always check with your Parts department for the latest information.
