GTI V6-2792cc 2.8L DOHC (AAA) (1996)
/Page-194002.png)
-
Check wiring between test box and 3-pin connector for open circuit according to wiring diagram.
-
Terminal 2 and test box socket 44.
-
Terminal 3 and test box socket 56.
Resistance: max. 1.5 ohms.
-
Check wiring between 3-pin connector and relay panel for open circuit according to wiring diagram.
Terminal 1 and relay panel.
Resistance: max. 1.5 ohms.
-
Additionally, check wires for short to one another.
-
Terminal 3 and test box socket 44.
-
Terminal 2 and test box socket 56.
Specification: infinite ohms.
If no wiring malfunction is detected and voltage was present between terminals 1 and 3:
-
Replace distributor with Camshaft Position (CMP) sensor -G40- .
If no wiring malfunction is detected and no voltage was present between terminals 1 and 3:
-
Replace ECM -J220-.
-
Read the readiness code. If DTC memory has been erased, verify repair via appropriate display group See Readiness code, creating. See:
Powertrain Management/Computers and Control Systems/Testing and Inspection
