GTI GLS L4-1.8L Turbo (AWW) (2001)
8
Piston with - automatic adjustment
^
Apply thin coat of assembly lubricant G 052 150A2 to piston before inserting
9
Sealing ring
^
Removing and installing
10 Brake caliper housing with parking brake cable lever
^
If a leak exists at the parking brake cable lever replace brake caliper housing
^
After repairing, pre-bleed caliper housing
Rear brake caliper piston, removing and installing
Special tools and equipment required
^
3272 Piston resetting and removal tool
^
3409 Wedge
^
Bleeder bottle
Removing
^
Remove piston from brake caliper housing by turning knurled wheel counterclockwise.
Notes:
^
Install special tool 3272 with the collar (arrow) positioned before the piston.
^
If the piston is difficult to move, use a 13 mm open end wrench on the flats (arrow-A-) provided for this purpose.