GTI GLS L4-1.8L Turbo (AWW) (2001)
^
Disconnect wiring connectors from pressure sensors -a- and -b-.
All vehicles
^
Disconnect brake lines at brake master cylinder and seal with plugs from repair kit, Part No. 1H0698311 A.
^
Remove nuts securing brake master cylinder to brake booster.
^
Remove heat shield if installed.
^
Carefully remove brake master cylinder from brake booster.
Installing
^
Install master cylinder in reverse order of removal.
Observe the following points when installing:
^
When connecting brake master cylinder and brake booster, be sure that push rod is correctly located in brake master cylinder.
^
After installing, bleed brakes.
^
Restore basic setting.