GTI GLS L4-1.8L Turbo (AWW) (2001)
-
Set camshaft sprocket to TDC No. 1 cylinder by turning crankshaft. Mark on camshaft sprocket must align with mark on cylinder head cover.
-
Remove cylinder head cover.
-
Take toothed belt off camshaft toothed belt sprocket.
-
Turn crankshaft back slightly.
-
Remove camshaft sprocket. When loosening camshaft sprocket bolt counter-hold with 3036.
-
Remove woodruff key from camshaft.
-
Remove camshaft position sensor housing.
-
Remove washer and hood for camshaft position sensor.
-
Clean drive chain and camshaft chain sprocket in area of arrows on bearing caps and mark installation position with a colored mark.
-
The distance between the two arrows/paint marks is equivalent to 16 drive chain rollers.