GTI GLS L4-1.8L Turbo (AWW) (2001)
-
Set camshaft sprocket to TDC No. 1 cylinder by turning the crankshaft. Mark on camshaft sprocket must align with mark on cylinder head cover.
-
Remove cylinder head cover.
-
Take toothed belt off camshaft toothed belt sprocket.
-
Turn crankshaft back slightly.
-
Remove camshaft sprocket. When loosening camshaft sprocket bolt counterhold with 3036.
-
Screw camshaft sprocket securing bolt-arrow-into camshaft onto stop by hand, to guide seal extractor.
-
Unscrew inner part of oil seal extractor 2085 two turns (approx. 3 mm) out of the outer part and lock in position with knurled screw.
-
Lubricate threaded head of oil seal extractor, place it in position and exerting firm pressure screw it into oil seal as far as possible.