GTI GLS L4-1.8L Turbo (AWW) (2001)
-
Connect VAG 1551 Scan Tool (ST) with VAG 1551/3B cable to Data Link Connector (DLC).
NOTE:
-
If nothing is indicated on display, check voltage supply for VAG 1551 scan tool according to wiring diagram.
-
Depending on the program, additional operating information can be printed out by pressing the HELP button of the VAG 1551 scan tool.
-
Function 00 "Automatic test sequence" can be performed in operating mode 1 "Rapid data transfer". This automatically checks all control modules
installed in the vehicle.
-
The -> button is used for advancing through the program sequence.
-
The PRINT button is used for switching on the printer (lamp in button lights up).
Indicated on display (* is displayed alternately):
VAG - On Board Diagnostic
HELP
1 - Rapid data transfer*
2 - Blink code output*
-
Press button 1 for "Rapid data transfer".
-
Continue On Board Diagnostic (OBD) of vehicle system to be tested as described under "performing On Board Diagnostic (OBD).
Connecting VAS 5051
Special tools and equipment