GTI GLS L4-1.8L Turbo (AWW) (2001)
/Page-1707003.png)
-
Assemble special tool with bonded rubber bushing.
-
Install bonded rubber bushing and special tool on rear axle.
-
Ensure mark aligns with trailing arm edge.
-
Install (pull in) bonded rubber bushing by turning spindle.
-
Check position of bonded rubber bushing after installing.
Continue rear axle installation in reverse sequence
Tightening torque:
Bearing bracket to rear 80 Nm axle (59 ft. lbs.)
Use new nuts and bolts!
