GTI GLS L4-1.8L Turbo (AWW) (2001)
Liftgate Window Glass: Service and Repair
Rear Window Removal and Installation
Rear Window, Assembly Overview
1
-
Rear window
2
-
Gasket
-
For rear window wiper
3
-
Sealing lip (component part of pre-coating)
4
-
PUR adhesive sealant
-
Cross section of bead: Width = 7 mm; Height = 11 mm (including pre-coating, residual material on window glass and window flange)
-
Curing time See: Related Information For All Flush Bonded Windows/Curing Time
5
-
Trim
6
-
Heated rear window contact
7
-
Dimension a = 4.5 mm (0.18 in.)
Undamaged Rear Window, Removing
-
Remove rear lid trim. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair
-
Disconnect wiring connections for heated rear window and press contact tabs onto window.
-
Remove rear window wiper motor. See: Wiper and Washer Systems/Wiper Motor/Service and Repair
-
Remove center mounted brake light. See: Lighting and Horns/Center Mounted Brake Lamp/Service and Repair
-
Loosen sealing lip from window flange with plastic wedge and spray in cleaning solution D 009 401 04 (as a substitute for lubricant).