Jetta L4-1.8L Turbo (AWD) (2000)
Alarm Module: Adjustments
Electronic Immobilizer, Adapting to Engine Control Module
Special tools and equipment
-
Scan tool VAG 1551 or vehicle system tester VAG 1552 with cable VAG 1551/3
Conditions
-
Authorized vehicle key required.
Work sequence
-
Connect scan tool VAG 1551 or vehicle system tester VAG 1552 with cable VAG 1551/3.
-
Switch on ignition.
-
Operate scan tool or vehicle system tester taking into account the information on the display:
-
Press key 1 for "Rapid data transfer".
-
Press keys 1 and 7 for address word "dash panel insert" and confirm entry with Q key.
Indicated on display:
1J0919991A A4-COMBIINSTR. VDO X00
Coding 20142
WSC XXXXX
-
Press the -> key.
Indicated on display:
IMMO IDENTNO.: VWZ7Z0555153 ->
-
Press the -> key.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press keys 1 and 0 for function "Adaption" and confirm entry with Q key.
Indicated on display:
Adaption
Feed in channel number XX
-
Press key 0 twice for "Channel number 0" and confirm entry with Q key.
Indicated on display:
Adaption
Q
Erase learnt values?
-
Confirm input with Q key.
Indicated on display:
Adaption
->
Learnt values have been erased
-
Conclude adaption by pressing -> key.
-
Press keys 0 and 6 for the function "End output" and confirm entry with the Q key.
-
Switch off ignition.
NOTE: The identity of the engine control module is read into the immobilizer control module when next switching the ignition on.