Jetta L4-1.8L Turbo (AWD) (2000)
Removing
-
Pry lock carrier trim panel -1- from lock carrier -2- at top -arrow A- then at bottom -arrow B-.
-
Remove trim panel -1- from over lock carrier
Installing
Install in reverse order.
NOTE: Before installing check clips -3- and replace as necessary.
Trim Under Steering Column
NOTE: Remove left trim -2- first because screws -3- are located under trim -2-.
-
Remove two screws -1-.
-
Unclip top of trim -2-.
-
Remove two screws -3-.
-
Unclip top of trim -4-.