Jetta L4-1.8L Turbo (AWD) (2000)
All gasoline engines, continued:
-
Mark direction of rotation of ribbed belt if it is to be reused.
-
To slacken ribbed belt turn tensioning element in direction of arrow.
-
Block tensioner with mandrel T10060.
-
Remove ribbed belt.
Ribbed belt, installing
NOTE:
-
When installing ribbed belts that have already been used, please make sure to mark the running direction during removal!
-
Before installing the ribbed belt, make sure that all subassemblies (generator, air conditioner compressor, vane pump) are tightly mounted.
-
When installing the belt, ensure correct seat of the ribbed belt in the belt pulleys!
-
Install ribbed belt.
-
Remove mandrel T10060.
-
Start engine and check belt running.
-
Install engine cover.
-
Install center and right engine compartment cover for noise damping.