Jetta L4-1.8L Turbo (AWD) (2000)
^
Apply silicone sealing bead as shown to the clean sealing surface of the oil pan. (The illustration shows the position of the sealant bead on the
cylinder block).
^
Install oil pan immediately and tighten all oil pan bolts lightly.
Note: After installing oil pan the sealant must be allowed to dry for approx. 30 minutes before engine oil is filled.
^
Tighten oil pan bolts to 15 Nm.
^
Tighten oil pan/transmission bolts to 45 Nm.
The rest of the assembly is basically a reverse of the disassembling sequence.
^
Tighten oil pan/oil return pipe to 10 Nm.