Jetta L4-1.8L Turbo (AWD) (2000)
/Page-585003.png)
-
Turn vibration damper to TDC No. 1 cylinder-arrows-.
-
Remove coolant expansion tank and place to side.
-
Remove power assisted steering reservoir and place to side.
-
Pull off vacuum pipes at activated charcoal filter and at throttle valve housing.
-
Remove toothed belt guard-upper part.
-
Install engine support bracket 10222A with legs 10-222A/1.
-
Locate bracket 3180 in lifting eye on cylinder head and take-up weight of engine.
-
Remove securing bolts from assembly mount/engine mount, assembly mount/body and assembly mount/body mount-arrows-and remove assembly
mount complete.
-
Remove engine mount on cylinder block.
