Jetta L4-1.8L Turbo (AWD) (2000)
-
Bring mark on camshaft in line with the mark on cylinder head cover.
-
Place toothed belt on crankshaft sprocket (observe direction of rotation).
-
Install engine mount to cylinder block. Tightening torque: 45 Nm
Note:
Before installing engine mount insert bolts into mount.
-
Install lower part of toothed belt guard. (Insert securing bolts with locking fluid "D 000 600 A2".) Tightening torque: 10 Nm
-
Secure vibration damper/belt pulley with one bolt (note arrangement).
-
Turn crankshaft to TDC No. 1 cylinder.
-
Install toothed belt onto coolant pump, tensioning roller and camshaft sprocket.
-
Tension toothed belt
B-Toothed belt only taken off camshaft sprocket