Jetta L4-1.8L Turbo (AWD) (2000)
Housing Assembly HVAC: Service and Repair
Assembly Vehicles With Air Conditioning
NOTE: This applies to vehicles with Air Conditioning or Digimatic Climate Control. For vehicles without A/C, see Heating and Ventilation Unit.
Assembly
1
-
Heater core
-
Always replace coolant after removal/replacement
-
Access release tabs for heater core after partially removing heating and A/C unit. See: Removal Vehicles With Air Conditioning
2
-
Housing, upper part
-
With fresh air and recirculating air flaps
3
-
Evaporator seal
4
-
Evaporator
5
-
Housing, lower part
Evaporator seal, installing
-
Glue foam seal -B- around circumference of evaporator -A-.
-
To allow evaporator water to drain, do not attach foam seal on evaporator in area -C-.
Evaporator inlet/outlet seal, installing