Jetta L4-1.8L Turbo (AWD) (2000)
/Page-2365001.png)
Fuel Gauge Sender: Service and Repair
Sender For Fuel Gauge, Removing and Installing
Removing
-
Fuel Pump (FP), removing. See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service and Repair
-
Disengage connector prongs of wires -3- and -4- and disconnect.
-
Pry off retaining straps -1- and -2- using screwdriver and remove sender for fuel gauge towards bottom (arrows).
Installing
-
Insert sender for fuel gauge into guides at Fuel Pump (FP) and press up until engagement.
